Więcej informacji uzyskają Państwo na naszych stronach POMPY BECZKOWE www.pompybeczkowe.com.pl POMPY DOZUJĄCE www.pompydozujace.com.pl POMPY KRZYWKOWE www.pompykrzywkowe.com.pl POMPY MAGNETYCZNE www.pompymagnetyczne.com.pl POMPY MEMBRANOWE www.pompy-membranowe.com.pl POMPY PERYSTALTYCZNE www.pompyperystaltyczne.com.pl POMPY PIONOWE www.pompypionowe.com.pl POMPY ŚRUBOWE www.pompysrubowe.com.pl POMPY WIROWE www.pompywirowe.com.pl POMPY ZĘBATE www.pompyzebate.com.pl INNE RODZAJE POMP Ten serwis wymaga wtyczki Flash Player 8 lub nowszej. Kliknij tutaj aby pobrać Flasha.

Miejsce na Twoją reklamę

Elektryczna pompa beczkowa obsługuje większość cieczy o niskiej lepkości, wszystkie począwszy od wody a skończywszy na stężonych kwasach lub rozpuszczalnikach. ZALETY POMP BECZKOWYCH - Wysoka wydajność - opróżnia beczkę 200L w 2 min - Dolna część pompy, narażona na zniszczenie jest wymienialna - Konstrukcja bez uszczelnień - Głębokość zanurzenia 750-1800 mm - Standardowo dostarczana z zamocowaniem do ściany i beczki

ZASADA DZIAŁANIA POMP BECZKOWYCH Oś silnika jest połączona z rotorem rury znajdującym się na samym dole pompy. Ciecz jest przez rotor wtłaczana wewnętrzną częścią rury do jej wylotu poniżej mocowania silnika.

RURY Wszystkie rury mają zdejmowaną dolną część. Rury są dostępne w następujących wykonaniach: PP (polipropylen) Do większości chemikaliów. Głębokość zanurzenia 700, 1000, 1200, 1500 lub 1800 mm. Max temperatura 54°C. PVDF Do bardzo agresywnych chemikaliów. Głębokość zanurzenia 700, 1000 lub 1200 mm. Max temperatura 82°C. Stal kwasoodporna SS 2343 Bardzo masywna, m.in. do rozpuszczalników i kwasów organicznych. Głębokość zanurzenia 1000, 1200, 1500 lub 1800 mm. Max temperatura 93°C.

For Chemicals Drum pump with mechanical seal
	Applications									PP for aggressive liquids e.g. acids, caustics, vegetable oils, paints... PVDF highly aggressive liquids like concentrated or mixed acids, ... SS acids, caustics, fruit-juices, milk, paints, thin-bodied oils, ... HC highly aggressive liquids like concentrated or heated acids and solvents, ...
	Pump tubes									tube: polypropylene (PP), polyvinylidenefluoride (PVDF), stainless steel (SS) or Hastelloy C4 (HC) seal: mechanical seal immersion depth: 700, 1000, 1200 mm and special immersion depth
	Drive motors									electrical: p310 = 520 Watt, 230 Volt / 50 Hz, 115 Volt / 60 Hz,    p400 = 850 Watt, 230 Volt / 50 Hz, 115 Volt / 60 Hz, pneumatical: d370 = 370 Watt at 6 bar air pressure
	Performance									delivery rate max. 175 l/min delivery head max. 22 metres water column viscosity max. 1000 Centipoise

For inflammable liquids Explosion-proof drum pumps in stainless steel and HC

Applications

SS inflammable liquids according to VbF HC highly aggressive and inflammable liquids

Pump tubes

tube: stainless steel (SS) or Hastelloy C4 (HC) seal: mechanical seal immersion depth: 700, 1000, 1200 mm and special immersion depth

Drive motors

electrical: ex300 = 420 Watt, 230 Volt / 50 Hz, 115 Volt / 60 Hz, pneumatical: d370 = 370 Watt at 6 bar air pressure

Performance

delivery rate max. 140 l/min delivery head max. 16 metres water column viscosity max. 400 Centipoise

For small disscharge flows Laboratory pumps in PP or stainless steel

Applications

PP for aggressive liquids e.g. acids, caustics, vegetable oils, paints, galvanic liquids, ... SS acids, caustics, fruit-juices, milk, ...

Pump tubes

tube: polypropylene (PP) or stainless steel (SS) seal: sea Hess immersion depth: 650, 900 mm and special immersion depth

Drive motor

electrical: 200 Watt, 230 Volt / 50 Hz

Performance

delivery rate max. 70 l/min delivery head max. 7 metres water column viscosity max. 500 Centipoise

For aggressive liquids Sealess drum pumps
		Applications									PP for aggressive liquids e.g. acids, caustics, vegetable oils, paints... PVDF highly aggressive liquids like concentrated or mixed acids, ... SS acids, caustics, fruit-juices, milk, paints, thin-bodied oils, ... HC highly aggressive liquids like concentrated or heated acids and solvents, ...
		Pump tubes									tube: polypropylene (PP), polyvinylidenefluoride (PVDF), stainless steel (SS) or Hastelloy C4 (HC) seal: sealless immersion depth: 700, 1000, 1200 mm and special immersion depth
		Drive motors									electrical: p310 = 520 Watt, 230 Volt / 50 Hz, 115 Volt / 60 Hz,    p400 = 850 Watt, 230 Volt / 50 Hz, 115 Volt / 60 Hz, neumatical: d370 = 370 Watt at 6 bar air pressure
		Performance									delivery rate max. 110 l/min delivery head max. 20 metres water column viscosity max. 700 Centipoise

For mixed liquids Mixing drum pumps in PP and stainles steel

Applications

PP aggressive emulsions, dispersions and suspensions SS paints and lacquers and other mixed and inflammable liquids

Pump tubes

tube: polypropylene (PP) or stainless steel (SS) seal: mechanical seal immersion depth: 700, 1000, 1200 mm and special immersion depth

Drive motors

electrical: p310 = 520 Watt, 230 Volt / 50 Hz, 115 Volt / 60 Hz,    p400 = 850 Watt, 230 Volt / 50 Hz, 115 Volt / 60 Hz,    explosion-proofed: ex300 = 420 Watt, 230 Volt / 50 Hz,    115 Volt / 60 Hz, pneumatical: d370 = 370 Watt at 6 bar air pressure

Performance

delivery rate max. 145 l/min delivery head max. 15 metres water column viscosity max. 1000 Centipoise

For medium-viscosity liquids Feed-screw drum pump in PP und stainles

Applications

PP aggressive medium-viscosity liquids and paints, vegetable oils, cosmetics,.... SS paints, lacquers, fruit-juices, oils, vegetable oils, cosmetics, foods,....

Pump tubes

tube: polypropylene (PP) or stainless steel (SS) seal: mechanical seal / sealless immersion depth: 700, 1000, 1200 mm and special immersion depth

Drive motors

electrical: p310 = 520 Watt, 230 Volt / 50 Hz, 115 Volt / 60 Hz, (universal motor)    p400 = 850 Watt, 230 Volt / 50 Hz, 115 Volt / 60 Hz, (universal motor)    pd500 = 0,18 kW, single 230 V / 50 Hz or three-phase 400 V / 50 Hz,

Performance

delivery rate max. 115 l/min delivery head max. 12 metres water column viscosity max. 6000 Centipoise

For toxic liquiuids Drum pumps with magnetic coupling

Applications

suitable for pumping toxic, gaseous and hazardous liquids due to being hermetically sealed with no leakage

Pump tubes

tube: polypropylene (PP), polyvinylidenefluoride (PVDF), stainless steel (SS) or Hastelloy C4 (HC) immersion depth: 700, 1000, 1200 mm and special immersion depth

Drive motors

electrical: p310 = 520 Watt, 230 Volt / 50 Hz, 115 Volt / 60 Hz,    p400 = 850 Watt, 230 Volt / 50 Hz, 115 Volt / 60 Hz, pneumatical: d370 = 370 Watt at 6 bar air pressure

Performance

delivery rate max. 175 l/min delivery head max. 22 metres water column viscosity max. 50 Centipoise

For complete drum emptying Comlete-drainage drum pump in PP andstainless steel

Applications

PP for aggressive liquids e.g. acids, caustics, vegetable oils, paints, galvanic liquids, ... Niro acids, caustics, fruit-juices, milk, paints, thin-bodied oils, ...

Pump tubes

tube: polypropylene (PP) or stainless steel (SS) seal: mechanical seal immersion depth: 700, 1000, 1200 mm and special immersion depth

Drive motors

electrical: p310 = 520 Watt, 230 Volt / 50 Hz, 115 Volt / 60 Hz,    p400 = 850 Watt, 230 Volt / 50 Hz, 115 Volt / 60 Hz, pneumatical: d370 = 370 Watt at 6 bar air pressure

Performance

delivery rate max. 90 l/min delivery head max. 16 metres water column viscosity max. 1000 Centipoise

For high-visccosity liquuids Eccentric screw drump i pumps in stainle

Applications

for pumping high-viscosity liquids e.g. resin, paints, lacquers, glue, oil, soap, shampoo, ointment, honey, sirup, tomato paste, fruit concentrate, molasse, glucose, ...

Pump tubes

tube: stainless steel (SS) stators: NBR, NBR-light, FPM, PTFE seal: mechanical seal or packing gland immersion depth: 1000 mm and special immersion depth

Drive motors

with and without quick release coupling electrical: 0,37 - 1,5 kW, 700 or 900 rpm, 400 Volt / 50 Hz pneumatical: 0,5-1,1 kW, up to 1000 rpm at 6 bar air pressure

Performance

delivery rate max. 60 l/min delivery head max. 12 bar viscosity max. 100.000 Centipoise

Advantages
		no inner-tube easily accessible shaft easy to clean solid shaft mechanical seal
		singlestage design big discharge flows multistage design lower noise more stages possible, gives more pressure
		with feed-screw for medium-viscous liquids smooth pumping of liquids low noise with three-phase motor high performance with universal motor
		quick release coupling seedy connection robust design rugged bow-gear coupling suitable for aggressive environments magnetic coupling hermetically sealed for gaseous and hazardous liquids no leakage
		Eccentric screw barrel pump with quick release coupling removable drive motor easy and safe handling with the separate pump tube • no lifting device necessary it's possible to drive several pump tubes with only one motor rigid connection of drive motor and pump tube

Accesories
		Drive motor Explosion-proof plug Explosion-proof socket Pump tube Hose connector Hose clamps Hose Hose fittings Hose fittings Nozzle Flow meter connection Flow meter Reducing piece Discharge spout Wall bracket Equipotential bounding cable Emission proof drum adapter Drum adapter Installation flange Clamping device Foot strainer

Drum Pumps GRÜN PUMPEN -  (718 KB)

Drum Pumps GRÜN PUMPEN -  (1,97 MB)

Drum Pumps GRÜN PUMPEN sets -  (1,74 MB)

Pobierz program Adobe Acrobat Reader:

-= go back =-